CAMP EXAM

Email address *

Enter First and Last Name *

What is RII? *

5 points

Required Individual Inspectors

Relief Inspection Invervals

Repairmen Inspection Id

Required Inspection Items

Correct answer

Required Inspection Items

Feedback for correct answers

Lucky pick..

Feedback for incorrect answers

Bad guess!!!

Is the CAMP designed to prescribe overhaul functions? *

5 points

Yes

Yes and it must be followed

Yes, in the Overhaul and Conditional Section of the CAMP

Correct answer

Feedback for correct answers

Good guess!

Feedback for incorrect answers

Where you sleeping thru the CAMP Presentation??

If you see a "NT" beside a CAMP Inspection Section that indicates.. *

5 points

Newly update Time

Not Tested

No Tolerance

Not required Today

Correct answer

No Tolerance

Feedback for correct answers

Another good guess!!

Feedback for incorrect answers

Ya gotta be kidding me....

How much overflight tolerance is built into the CAMP inspections? *

5 points

10% across the board

10% unless designated NT

8% - 10%

None is allowed

Correct answer

10% unless designated NT

If we contract out any maintenance inspection, must they follow the CAMP? *

5 points

Yes

No, since they do not fall under it

Yes, plus we have to provide a copy

It is up to the discretion of the contract maintenance provider

Correct answer

Yes, plus we have to provide a copy

Can any mechanic perform RII duties?

5 points

Yes, if they feel they are experienced enough

Only if designated as a RII inspector by the DOM

Yes, if the comply with the RII Inspection Cards

No, unless designated a RII Inspector by the Chief Inspector

Correct answer

No, unless designated a RII Inspector by the Chief Inspector

What is a the Continuing Analysis and Surveillance System? *

5 points

Don't know, don't care

It provides analysis of our maintenance programs

A method to document errors so the appropriate person is identified and counseled

An advanced charting program

Correct answer

It provides analysis of our maintenance programs

Are AD's complied with in the CAMP? *

5 points

Yes

Yes, with each identified by each Inspection Segment

No, they are tracked by the CALM program

They are already "built in" to the applicable inspection

Correct answer

No, they are tracked by the CALM program

Are you allowed to break up each Inspection such as the A 5005? *

5 points

No, each must be completed in their entirety once started

Yes, but must complete the entire "Segment" and make a logbook entry

Only if approved by the Chief Inspector

Correct answer

Yes, but must complete the entire "Segment" and make a logbook entry

Section A of the CAMP defines inspection related to the.. *

5 points

Airframe

Engine

RII Cards

Addition components that have been added

Correct answer

Airframe

If you broke apart Inspection A 0102, inspection A 0103 would be due *

5 points

From the time you started the first segment

From the time you completed the entire A 0102 and made the log book entry

100 hours and 120 days from when A 0102 was due

From the mid point of when the entire A 0102 was completed

Correct answer

From the time you started the first segment

Must the CAMP be followed for any Unscheduled maintenance? *

5 points

No, log book entry

Yes, but you must open up a Work Order

No, unless it falls under a RII item, then the card must be followed and a RII inspector must sign it off

Yes, at all times

Correct answer

No, unless it falls under a RII item, then the card must be followed and a RII inspector must sign it off

What is the main difference between a AAIP and a CAMP

5 points

Nothing, just the name

AAIP applies to single engine aircraft and the CAMP to multi engine aircraft

The amount of seats the aircraft is certificated with

Depends on Make and Model

Correct answer

The amount of seats the aircraft is certificated with

When you perform any inspection in Section B, does the form cover both engines? *

5 points

Yes

No, you must do a complete the entire Inspection Segment Form for each engine

Yes, but you must put both engine serial numbers in

Correct answer

No, you must do a complete the entire Inspection Segment Form for each engine

How do you sign off the completion of an Inspection Section?

5 points

With a standard 43.11 write up

By the verbiage provided at the end of each Inspection Section

You have to enter each individual inspection and sign it off in the log book

They do not require a sign off since you completed the form

Correct answer

By the verbiage provided at the end of each Inspection Section

What do you do if you find a discrepancy during any CAMP inspection? *

5 points

Write it up on the CAMP Inspection form on the back

Enter it in the log book or work order

No entry is required, you just perform the corrective action

Notify the DOM and he will assign someone to the repair

Correct answer

Enter it in the log book or work order

Is the CAMP program required by regulation or just written to make maintenance easier? *

5 points

It is not a required program

I/A/W 135.41(a)(2) it is required for aircraft configured for 10 seats or more excluding any pilot seats

It is determined by the Operator

Is is highly advised by the manufacture

Correct answer

I/A/W 135.41(a)(2) it is required for aircraft configured for 10 seats or more excluding any pilot seats

Must we perform inspections in Attachment B?

5 points

Yes, but are not included in the CAMP Program and tracked on CALM

It is our option

Yes, as B allows you to perform these during any Inspection you feel it fits into

Correct answer

Yes, but are not included in the CAMP Program and tracked on CALM

What does "CAMP' stand for?

10 points

Completed All Maintenance Prescribed

Continuous Airworthiness Maintenance Program

Can't A Mechanic Play

Compliance Action Maintenance Procedure

Correct answer

Continuous Airworthiness Maintenance Program

This content is neither created nor endorsed by Google.

Forms